samsung m11[m115f] frp done in one click by umt qcfire in edl

    samsung m11[m115f] frp done in one click by umt qcfire in edl

    Loader File HERE

    TEST POINT HERE

     

    Operation : Reset FRP
    Checking for existing devices...Found
    Port : Qualcomm HS-USB QDLoader 9008 (COM100)
    Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.7
    Opening Port...OK
    Init Handshake Sequence...OK
    Hardware ID : E1A00900 [8953] 00002000
    OPK_DATA : 412796CDA9753F93CE68BCC07BCC2D2B4FCA4F7D17CC3E1790 7D02EBABFA07EC
    Initializing Protocol...OK
    Sending Loader [prog_emmc_firehose_8953_ddr.mbn]...Done
    Executing Loader...OK
    Detecting Chip Type...OK
    Hardware : 8953, eMMC, 32 GB
    LU Count : 1 [0x03A3E000]
    WARNING! High Speed Driver is not installed.
    Please install driver from QcFire\Drivers folder using Device Manager.
    Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
    Reading Partition Table...OK
    Reading Device Information...Failed
    Resetting FRP Lock......Done
    Operation Finished.

     

  • Date: 03 Dec 2021
  • Publisher: gsmserverpro
  • Category: SAMSUNG