MT6735M_EMMC__5045T TCL__alps-mp-m0.mp1-V2.39.1_jhz6735m.35u.m_P50 2021_12_20_12_51.zip

Action : Read Firmware.
Selected Alcatel:OT-5045T
Exe version: NCKDongle AndroidMTK 2.7.5
Phone must be off with battery inside.
Battery must be charged
Please insert USB cable now...
For some phones need to keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(9) : MediaTek PreLoader USB VCOM (Android) (COM9)
[9] \\?\usb#vid_0e8d&pid_2000#6&38070389&0&6#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Boot mode: Preloader
BBCHIP: 335 0 ca00
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6735M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) MICRON 0x50314a39354b
EMMC FW VERSION: 12:00:00:00:00:00:00:00
EMMC CID: FE014E50314A39354B : 00000000000000
EMMC UA SIZE: 0x1d3000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d3600000 [7.303 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected(17) : MediaTek DA USB VCOM (Android) (COM17)
[17] \\?\usb#vid_0e8d&pid_2001#6&38070389&0&6#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Build ID: MRA58K
Display ID: MRA58K release-keys
Version: 6.0
Build Date: Wed Jul 20 22:35:24 CST 2016
Model: 5045X
Brand: TCL
Device: PIXI4_5_4G
Manufacturer: TCL
Mediatek Version Release: alps-mp-m0.mp1-V2.39.1_jhz6735m.35u.m_P50
FRP partition: /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/frp
Region: IT

Phone have OTP partition.
MODEL FROM PROINFO: 5045T-2KALIN1
SECRO FROM PROINFO: L7EFKIL0BP20
OTP IMEI: 359365071008464
Start dumping flash, this can take up to 1 hour.......
Dumping Preloader.
Partition: proinfo
Partition: nvram
Partition: protect1
Partition: protect2
Partition: mobile_info
Partition: simlock
Partition: para
Partition: lk
Partition: boot
Partition: recovery
Partition: logo
Partition: expdb
Partition: seccfg
Partition: oemkeystore
Partition: secro
Partition: keystore
Partition: tee1
Partition: tee2
Partition: frp
Partition: nvdata
Partition: metadata
Partition: system
Partition: cache
Partition: userdata
Partition: otp
Partition: flashinfo
Start processing proinfo.bin ......
Reading: BEGIN: 0x800000 - LEN: 0x300000
Start processing nvram.bin ......
Reading: BEGIN: 0xb00000 - LEN: 0x500000
Start processing protect1.img ......
Reading: BEGIN: 0x1000000 - LEN: 0xa00000
Start processing protect2.img ......
Reading: BEGIN: 0x1a00000 - LEN: 0xa00000
Start processing mobile_info mobile_info.img
Reading: BEGIN: 0x2400000 - LEN: 0x800000
Start processing simlock
Start processing lk
Start processing boot
Start processing recovery
Start processing logo ......
Start processing secro secro.img
Reading: BEGIN: 0x8200000 - LEN: 0x600000
Start processing trustzone
Start processing system
Reading: BEGIN: 0xe800000 - LEN: 0x90000000
Saved to : C:\ProgramData\Android_MTK_Backup_Folder\firmware_backup\MT6735M_EMMC__5045XTCL__2021_12_20_12_51
Wait untill phone will start charging.
[0]All done.